100% PASS QUIZ RUCKUS - EFFICIENT VALID RCNI TEST REGISTRATION

100% Pass Quiz RUCKUS - Efficient Valid RCNI Test Registration

100% Pass Quiz RUCKUS - Efficient Valid RCNI Test Registration

Blog Article

Tags: Valid RCNI Test Registration, RCNI Authorized Test Dumps, Valid RCNI Exam Test, RCNI New APP Simulations, RCNI Valid Test Tutorial

With the help of Exam4Labs’s marvelous brain dumps, you make sure your success in RCNI certification exam with money back guarantee. Exam4Labs serves a huge network of its clientele with the state of the art and exam-oriented short-term study content that requires as little as a two-week time to get ready the entire RCNI Certification syllabus.

RUCKUS RCNI Exam Syllabus Topics:

TopicDetails
Topic 1
  • ICX Solution Troubleshooting: RUCKUS ICX networking Engineers are expected to demonstrate troubleshooting skills in this section. It covers basic networking troubleshooting techniques and procedures for performing ICX switch recovery. Candidates should be able to identify and resolve common network issues in ICX environments.
Topic 2
  • ICX Solution Implementation: This significant portion of the exam assesses the skills of RUCKUS ICX Network Administrators in implementing ICX solutions. It covers ICX software management, stacking capabilities, PoE configuration, Layer 2
  • 3 protocols, and ICX services, IPv4
  • IPv6 addressing on switch interfaces, ICX switch management methods, and configuring multicast and security features. Candidates should be able to demonstrate proficiency in configuring stacking for scalable network deployments.
Topic 3
  • RUCKUS Products & Solutions: RUCKUS ICX networking Engineers are expected to showcase their knowledge of RUCKUS products and solutions in this section. It focuses primarily on the ICX product line, covering various switch models and their capabilities. Candidates should be familiar with the features, specifications, and use cases of different ICX switches.
Topic 4
  • Foundational Networking Concepts: This section of the exam measures the skills of RUCKUS ICX Network Administrators and covers essential networking concepts. It includes VLAN design and configuration, STP and loop prevention protocols, PoE requirements, basic LAN concepts, Layer 3 routing configurations, and basic QoS concepts. Candidates should be able to demonstrate proficiency in designing VLANs for network segmentation.

>> Valid RCNI Test Registration <<

Real RUCKUS RCNI Exam Environment with Our Practice Test Engine

Exam4Labs RUCKUS Certified Networking Implementer (RCNI) questions in three formats is an invaluable resource for preparing for the RCNI exam and achieving the RUCKUS certification. With customizable RCNI practice exams, up-to-date RCNI questions, and user-friendly formats, Exam4Labs is the perfect platform for clearing the RUCKUS RCNI test. So, try the demo version today and unlock the full potential of Exam4Labs RUCKUS Certified Networking Implementer (RCNI) exam dumps after payment, taking one step closer to your career goals.

RUCKUS Certified Networking Implementer Sample Questions (Q36-Q41):

NEW QUESTION # 36
Which ICX model has eight integrated QSFP28 ports?

  • A. ICX7550-48F
  • B. ICX7850-48F
  • C. ICX7750-48F
  • D. ICX7650-48F

Answer: D


NEW QUESTION # 37
When using zero-touch stacking, which two prerequisites must be in place to ensure all devices join the stack? (Choose two.)

  • A. configure each unit's management IP, VLANs, and tagging
  • B. enable stacking on all devices
  • C. issue stack disable on intended member devices
  • D. enable stacking on the active controller
  • E. ensure units have clean configurations

Answer: D,E


NEW QUESTION # 38
Which command will create VE 2 on an ICX running FastIron 08.0.95?

  • A. ICX(config-vlan-2)# interface ve 2
  • B. ICX(config-vlan-2)# vlan 2 name VE2
  • C. ICX(config-vlan-2)# router-interface ve 2
  • D. ICX(config-vlan-2)# enable

Answer: C

Explanation:
In RUCKUS ICX switches, a Virtual Ethernet (VE) interface, also known as a routed interface, is used to route traffic between VLANs. To create a VE interface and associate it with a VLAN, follow these steps:
* Access VLAN Configuration Mode: Enter global configuration mode and then VLAN configuration mode for the desired VLAN. For VLAN 2, the commands are:
* Create and Associate VE Interface: Within VLAN configuration mode, create the VE interface and associate it with the VLAN using the router-interface command:
router-interface ve 2
This command creates VE interface 2 and links it to VLAN 2.
* Configure the VE Interface: Exit VLAN configuration mode and enter interface configuration mode for the newly created VE interface to assign an IP address:
interface ve 2
ip address <IP_address> <subnet_mask>
Replace <IP_address> and <subnet_mask> with the desired IP address and subnet mask for the VE interface.
By following these steps, you create a VE interface that enables routing for the associated VLAN. This configuration is essential for inter-VLAN routing,


NEW QUESTION # 39
In the following output, what is the bridge priority of the root in hex?

  • A. 9c49
  • B. 0
  • C. 1
  • D. 2

Answer: D

Explanation:
* Understanding Bridge Priority:
* The bridge priority in the Spanning Tree Protocol (STP) is represented in hexadecimal format in RUCKUS ICX switches.
* In the output, the bridge priority is a combination of the priority value (default is 32768 or
0x8000 in hex) and the VLAN ID.
* Why It Is 8000:
* Unless explicitly modified, the default bridge priority is 8000 in hexadecimal.
* Why Other Options Don't Apply:
* B. 0: This value does not align with the default or modified priority values.
* C. 9c49: This might represent a different component of the output, such as MAC address.
* D. 20009: This is an incorrect representation of the bridge priority.
References:
* ICX Spanning Tree Configuration Guide: RUCKUS Documentation


NEW QUESTION # 40
Which two commands can be used to display the IP address of a device attached to a switch port? (Choose two.)

  • A. show lldp neighbor detail
  • B. show arp
  • C. show mac-address all
  • D. show interface
  • E. show interface brief wide

Answer: A,B

Explanation:
To determine the IP address of a device connected to a specific switch port on a RUCKUS ICX switch, the following commands can be utilized:
* show lldp neighbor detail
This command provides detailed information about devices connected via LLDP, including their IP addresses.
Command Usage:
show lldp neighbor detail
Output Example:
Local Port: 1/1/2
Neighbor MAC: 60d0.2c1c.1cd0
System Name: RuckusAP
Management Address: 192.168.0.3
In this example, the Management Address field displays the IP address of the connected device on port 1/1/2.
Ruckus Wireless Community
* show arp
The Address Resolution Protocol (ARP) table maps IP addresses to MAC addresses. By examining the ARP table, you can identify the IP address associated with a device's MAC address.
Command Usage:
show arp
Output Example:
IP Address MAC Address Type Age Port
192.168.0.3 60d0.2c1c.1cd0 Dynamic 0 1/1/2
Here, the IP address 192.168.0.3 is associated with the MAC address 60d0.2c1c.1cd0 on port 1/1/2.
Ruckus Wireless Community
Note: For the show lldp neighbor detail command to provide IP addresses, LLDP must be enabled on both the switch and the connected devices. Additionally, the devices should support LLDP and be configured to advertise their management addresses.


NEW QUESTION # 41
......

We have created a number of reports and learning functions for evaluating your proficiency for the RCNI exam dumps. In preparation, you can optimize RUCKUS RCNI practice exam time and question type by utilizing our RUCKUS RCNI Practice Test software. Exam4Labs makes it easy to download RUCKUS Certified Networking Implementer (RCNI) exam questions immediately after purchase.

RCNI Authorized Test Dumps: https://www.exam4labs.com/RCNI-practice-torrent.html

Report this page